Setting Up A Printer; Turning Off The Computer - Toshiba M640-BT2N23 User Manual

M640-bt2n23 user's guide
Hide thumbs Also See for M640-BT2N23:
Table of Contents

Advertisement

84
Getting Started

Turning off the computer

Setting up a printer

NOTE
If your printer does not support Plug and Play, follow these steps to
set it up for the first time. You only need to set up the printer once.
1
Click Start, Control Panel, Hardware and Sound, and then
under Devices and Printers, click Add a printer.
The Add Printer Wizard appears.
(Sample Image) Add Printer Wizard
2
Follow the on-screen instructions to set up your printer.
Turning off the computer
It is a good idea to turn off your computer when you are not using it
for a while.
If you are using the computer for the first time, leave the computer
plugged into a power source (even though the computer is off) to
fully charge the main battery.
Some printers require a specific installation process. Refer to your
printer installation guide for instructions before completing the
following procedure.
Pressing the power button before shutting down the Windows
operating system could cause you to lose your work. Make sure the
system indicator panel's storage drive light and the drive in-use light
are off. If you turn off the power while a disk/disc is being accessed,
you may lose data or damage the disk/disc and/or drive.
®

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents