Adjusting The Quality Of The External Display - Toshiba M640-BT2N23 User Manual

82
Getting Started
Using external display devices
2 While holding down
you want takes effect. Briefly pause each time you press the
key to allow time for the display to change.
This hot key cycles through the settings in the following order
(the last two options are available if an external monitor is
connected):
❖
❖
❖
❖
❖
❖
❖
❖
❖
❖
(Sample Image) Display options window
3 Release the

Adjusting the quality of the external display

To obtain the best picture quality from your television (or other
video display device), you may need to adjust the video settings.
See the video device documentation for additional configuration
steps.
Built-in display only
Built-in display and external monitor (simultaneously)
External monitor only
Built-in display and TV (or other external video device)
TV (or other external video device)
External monitor and TV
Built-in display and external monitor (extended mode)
Built-in display and TV (extended mode)
External monitor and TV (extended mode)
Swap-Switch primary display between internal display
and external monitor when using extended desktop
key.
Fn
Fn , press F5 repeatedly until the setting
F5