Toshiba L640-BT2N13 User Manual page 46

46
Getting Started
Connecting to a power source
To connect AC power to the computer:
1 Connect the power cord/cable to the AC adaptor.
(Sample Illustration) Connecting the power cord/cable to the AC
adaptor
2 Plug the AC adaptor cord into the DC-IN on the side of the
_
+
computer.
NOTE
3 Connect the power cord/cable to a live electrical outlet.
The AC power light on the indicator panel glows white.
The computer's main battery light gives you an indication of
the main battery's current charge:
❖
❖
❖
Handling the cord on this product will expose you to lead, a
chemical known to the State of California to cause birth defects or
other reproductive harm. Wash hands after handling.
Locate the DC-IN port on the Quick Start Card that shipped with your
computer.
Never attempt to connect or disconnect a power plug with wet hands.
Failure to follow this instruction could result in an electric shock,
possibly resulting in serious injury.
Glows amber while the main battery is being charged
(AC adaptor connected)
Glows white when the main battery is fully charged
Is unlit when the main battery has discharged, the battery
is not charging, or the AC adaptor is not plugged into the
computer or AC outlet