Bosch TPA 300 User Manual page 24

2.4. M ID
ANUAL
This function - only available for certain programmable sensors brands - enables the ID's
for damaged sensors to be entered manually. Be careful to enter only a valid sensor ID in
the correct format (decimal or hexadecimal) who depends of the type of sensor.
Scroll to select the
MANUAL option.
Use the virtual
keyboard to enter
the sensor ID of the
damaged sensor.
Be careful to enter
only a valid sensor
ID in the correct
format (decimal or
hexadecimal).
Position the blank
sensor in front of the
tool antenna to send
the ID to the new
sensor.
Wait a few seconds
during the
programming
process.
UM-BTPA1-6 22/54
TPA 300 user guide
= Continue
= Previous
= To send
the new ID
to the
sensor
= To
program
the sensor
User guide BOSCH TPA 300