Operation - Cub Cadet 19A70040100 Operator's Manual

Operation

Bagger Usage
NOTE: When all of the grass bags are full, place the tractor on a
firm, level surface, disengage the PTO, turn the tractor engine off
and set the parking brake.
1. Pivot the seat forward and up.
2. Lift up grass bag cover by pushing in on the rear, right-side
tab with your right hand, as seen in 1 of Figure 5-1, and lifting
the cover with your left hand in the center rear of the bagger
cover, 2. Do not remove the chute tube assembly from the
tractor.
2
Figure 5-1
3. Remove the grass bags, as shown in Figure 5-2, by lifting
each bag up (1) and moving the bags away from the bag
support assembly (2).
4. Empty the grass clippings at a proper disposal sight, use
the handle at the bottom of each grass bag. Holding the
bag firmly, empty the contents
1
5. Replace the grass bags in the reverse order and in the same
orientation in which they were removed, close lid, pivot
down the seat, restart your tractor and resume cutting your
grass.
2
1
Figure 5-2
5
15