Epson Stylus Scan 2500 Supplemental Information page 2

2. Type EPLPTDMA in the Open box, then click OK.
3. The following dialog box appears. Clear the check box that
appears beside the name of the port to which you have
connected the Stylus Scan, then click OK.
Note:
Unavailable ports appear dimmed.
4. Restart Windows.
USB (Windows 98) Installation Problems
If the Stylus Scan Driver was not properly installed, uninstall the
Stylus Scan Driver in the manner described in the Setup Guide,
then reinstall it.
If, after doing the above, the Stylus Scan does not work correctly,
check the following:
2