Removing Memory Media; Using The I.link ® Port - Toshiba A215-S7411 User Manual

Removing memory media

1 Prepare the media for removal by clicking the Safely Remove
Hardware icon in the Notification Area and then selecting the
card or device you want to remove.
If the system is unable to prepare the media for safe removal, a
message will tell you to try again later. If the media can be
removed now, the system displays Safe to Remove Hardware.
2 Gently press the card inward to release it.
The card pops out slightly.
3 Grasp the card and pull it straight out.
(Sample Illustration) Removing memory media
Using the i.LINK
(Available on certain models)
The i.LINK
computer provides an extremely fast data transfer rate.
In addition to high speed, the i.LINK
isochronous data transfer (the delivery of data at a guaranteed rate).
This makes it ideal for devices that transfer high levels of data in
real-time, such as video devices.
As with USB ports, the i.LINK
(automatic configuration) and hot swapping (the ability to connect
and disconnect devices while the computer is on).
Exploring Your Computer's Features
Do not remove memory media while data is being written or read.
Even when the Windows
to the media might still be in progress and your data could be
destroyed. Wait for the indicator light to go out.
®
port
®
port (available on certain models) on the side of the
Using the i.LINK
®
message "copying..." disappears, writing
®
port also supports
®
port supports both Plug-and-Play
127
®
port