Directing The Display Output When You Turn On The Computer; Adjusting The Quality Of The External Display - Toshiba A135-S2326 User Manual

5 Then click OK.

Directing the display output when you turn on the computer

Once you have connected an external display device, you can
choose to use the internal display only, the external device only, or
both simultaneously. The quickest way to change the display output
settings is to use the display hot key (
1
Press
2 While holding down
you want takes effect. Briefly pause each time you press the
key to allow time for the display to change.
This hot key cycles through the settings in the following order:
❖
❖
❖
❖
❖
(Sample Image) Display options window
3
Release the

Adjusting the quality of the external display

To obtain the best picture quality from your television (or other
video display device), you may need to adjust the video settings.
See the video device documentation for additional configuration
steps.
Using external display devices
Fn and F5 simultaneously.
Built-in display only
Built-in display and external monitor simultaneously
External monitor only
Built-in display and TV
TV only
Fn key.
Getting Started
Fn +
Fn , press F5 repeatedly until the setting
F5 ):
69
F5