Care And Maintenance Of Your Fingerprint Reader - Toshiba A135-S2326 User Manual

A135-s2326 user's guide
Hide thumbs Also See for A135-S2326:
Table of Contents

Advertisement

162
Toshiba Utilities
Fingerprint Authentication Utility
3
Select Registrations.
4
Select a registration.
5
Click Delete.
How to Delete the Fingerprint Data
Fingerprint data is stored in the non-volatile memory. If the
computer changes ownership, Toshiba recommends the following
procedure:
1
Click Start, All Programs, Protector Suite QL, and then
Control Center.
The Protector Suite Software screen is displayed.
2
Click Fingerprints then Delete.
3
Click Settings then Fingerprint Storage Inspector.
The Fingerprint Storage Inspector screen is displayed.
4
If other fingerprint data is still displayed on the list, hold down
the
selected, then click Remove.
5
Click OK to make the changes permanent.
6
Check that all Fingerprint data was deleted on the Fingerprint
Storage Inspector screen.

Care and maintenance of your fingerprint reader

Failure to follow these guidelines and/or procedures might result in
damage to the reader or cause reader failure, finger recognition
problems, or lower finger recognition success rate.
Do not scratch or poke the reader with your nails or any hard or
sharp objects.
Do not press the reader with too much pressure.
Do not touch the reader with a wet finger or any wet objects.
Keep reader surface dry and free of water vapor.
Do not touch the reader with a soiled finger. Minute foreign
particles on a soiled or dirty finger may scratch the reader.
Do not paste stickers or write on the reader.
Do not touch the reader with a finger or any object with built-
up static electricity.
Observe the following before you swipe your finger on the reader,
whether for fingerprint enrollment/registration or recognition.
Control
key and select each fingerprint until they are all

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents