In/Out Port - Sony PetaSite DMS-B150L Operation Manual

7 Arrow buttons
During menu operation, press one of the lit arrow
buttons, and one of the following menu items or values
will appear.
8 ENTER button
During menu operation, pressing this button registers
the set value.
9 ESC/CLR (escape/clear) button
Pressing this button restores the status of one step
before.

IN/OUT Port

OPEN
1 OPEN button
2 Function buttons
3 NO MAGAZINE indicator
NO MAGAZINE
1
IN OUT
2 4 IN/OUT indicators
IN OUT
3
IN OUT
4
IN OUT
5
IN OUT
1 OPEN button
To load or remove a cassette via the port, press this
button to open the door. When the button is pressed, it
lights and remains lit until the port is closed.
Depending on the operating condition of the system,
some time may be required until the door opens.
When an error is generated, the lamp of the button
flashes.
2 Function buttons
The functions of these buttons are set using software
3 NO MAGAZINE indicator
Lights in red if no magazine is loaded in the magazine
holder.
4 IN/OUT indicators
These indicators show the status of each cassette slot.
IN indicator lit: A cassette is loaded in the slot.
OUT indicator lit: A cassette is being removed
from the drive.
IN and OUT indicators lit: The bar code on a
cassette is being read. In some operating modes, a
cassette may be pulled in before the indicators are
lit.
IN and OUT indicators blinking: No bar code label
is attached to the cassette or the label cannot be
read.
9 (E)