Hitachi SVP F 00 Series Manual page 226

Tip: C:\MAPP indicates the installation directory of the storage
management software and SVP software. If the installation directory is
not C:\Mapp, replace C:\Mapp with the appropriate installation
directory.
3. The information of the port numbers to be used in the SVP is displayed. For the
ports whose numbers are not allocated, Not Defined is displayed.
4. A completion message appears. Press any key to continue.
5. Close the command prompt.
Chapter 14: Changing and initializing SVP port numbers
Service Processor Technical Reference
Viewing the port number to be used in the SVP
226