Hitachi SVP F 00 Series Manual page 217

The following TCP/IP port assignments are used by the storage system, other
devices, and applications.
Port number
80
161
427
1099
2000
5989
10995
23015
23016
28355
31001
34001
51099
51100
The effective range of the port number is 0 to 65535. Select a number that is not
■
already in use by another service.
Do not use port numbers from 1 to 1023 because they are reserved in other
■
applications. Instead, change the port numbers to 1024 or higher. However, the
port numbers of 2049, 4045, and 6000 cannot be used for MAPPWebServer and
MAPPWebServerHttps.
Chapter 14: Changing and initializing SVP port numbers
Service Processor Technical Reference
Usage description
Used by the SVP, Hitachi Storage Advisor, and Device
Manager - Storage Navigatorto communicate through
the HTTP protocol.
UDP (SNMP uses this port to send traps from the
storage system) .
Used by SMI-S.
Used by Hitachi Command Suite products JAVA RMI
Registry server.
TCP (Device Manager - Storage Navigator: Nonsecure)
Cisco Skinny Client Control Protocol (SCCP) uses port
2000 for TCP. If you use Device Manager - Storage
Navigator in a network with SCCP, change the TCP
port that Device Manager - Storage Navigator uses
(refer to the Device Manager - Storage Navigator
online help).
Used by SMI-S.
TCP Device Manager - Storage Navigator and Hitachi
suite components)
Used for Web browser communications.
Used for Web browser communications via SSL.
TCP (Device Manager - Storage Navigator: Secure)
Used for communication by Hitachi Command
Control Interface (CCI) data collection procedures.
Used by RAID Manager.
Used by Device Manager - Storage Navigator for
communication.
Used by Device Manager - Storage Navigator for
communication.
Changing SVP port numbers
217