Audio Select; Input Skip - Sharp AQUOS LC-60LE636E Operation Manual

Useful viewing functions
Selecting the WSS picture size manually
Option
4:3 mode
The "WSS" signal has 4:3 auto-switching that allows
you to select between "Normal" and "Panorama".
Go to "Menu" > "Setup" > "Option" > "4:3
mode".
Item
Normal range keeping 4:3 or 16:9
Normal
aspect ratio.
Wide image without side bars.
Panorama
WSS signal 4:3 screen
4:3 mode
4:3 mode "Normal"
"Panorama"
Terminal setting
Option

Audio select

When using the PC terminal or HDMI 2 terminal, you
must select which terminal uses the AUDIO (L/R)
jack for analogue audio input.
Go to "Menu" > "Setup" > "Option" > "Terminal
setting" > "Audio select".
When selecting "HDMI 2" from the "INPUT" menu
Item
When connecting devices (including a
PC) with a HDMI cable to the HDMI 2
HDMI (Digital)
terminal.
When connecting devices (including
a PC) with a DVI/HDMI cable to
the HDMI 2 terminal and inputting
HDMI+Analog
analogue audio signals from the AUDIO
(L/R) jack.
NOTE
• You must set this to "HDMI+Analog" when connecting
devices (including a PC) with an HDMI-certified cable to
the HDMI 2 terminal. If "HDMI (Digital)" is set, there will
be no sound output.
When selecting "PC" from the "INPUT" menu
Item
When connecting devices with an
AV cable to the PC terminal, displays
Video
images without audio.
When connecting a PC to the PC
terminal, and inputting analogue audio
Video+Audio
signals from the AUDIO (L/R) jack.
42
Skipping specified inputs
Option

Input skip

This setting allows you to skip the SCART, HDMI,
PC, ATV, DTV or SAT input on the input source
selection operation.
Go to "Menu" > "Setup" > "Option" > "Terminal
setting" > "Input skip".
Setup
Terminal setting
Input skip
[Yes]
[No]
[No]
[No]
[No]
[No]
[No]
[No]
NOTE
• When you select "ATV", "DTV" or "SAT", the skip
function works only when using the # b button
on the front of the TV.