Controlling Hdmi Devices; Audio Select For Connecting Hdmi; Selecting The Input Source - Sharp 60X50H Operation Manual

Settings when using external devices

Controlling HDMI devices

This system is using the HDMI CEC (Consumer
Electronics Control) technology.
What you can do with CEC capable
using HDMI devices
✔ Single remote control operation
The TV automatically recognises the connected HDMI
devices and you can use the remote control provided
with this TV to control the TV and the relative devices
at the same time. (See page 61 to 65)
NOTE
• Point the remote control toward the TV, not to the
connected HDMI device.
• Video noise may occur depending on the type of HDMI
cable used. Make sure to use a certifi ed HDMI cable.
• These operations affect the HDMI device selected as the
current input source. If the device does not operate, turn
on the device and select the appropriate input source using
TV/VIDEO.
• When you insert/remove HDMI cables or change
connections, turn on all connected HDMI devices before
turning on the TV. Confi rm that picture and audio are
correctly output by selecting "HDMI1", "HDMI2", "HDMI3"
or "HDMI4" from the "INPUT SOURCE" menu.

Audio select for connecting HDMI

When connecting HDMI to the HDMI 2 terminal, and
inputting analogue audio signals from the AUDIO IN
terminal.
Go to "MENU" s "Setup" s "Option" s "Terminal
setting" s "Audio select".
Selected item
HDMI (Digital)
When connecting devices with HDMI
cable to the HDMI 2 terminal.
HDMI +
When connecting devices with HDMI
Analogue
cable to the HDMI 2 terminal and
inputting analogue audio signals from
the AUDIO IN terminal.
NOTE
• When connecting an DVI-HDMI conversion adaptor/cable
to HDMI 2 terminal, you must set to "HDMI+Analogue". If
"HDMI (Digital)" is set, there will be no sound output.
58
60X50H_en_ID5.indd 58 60X50H_en_ID5.indd 58
Can use for selecting the input source.
Using TV/VIDEO on the remote control unit or on
the TV
TV/VIDEO allows you to choose from the available
input sources.
Description

Selecting the input source

Press TV/VIDEO on the remote control unit or
1
on the TV.
Press TV/VIDEO on the remote control unit or
2
on the TV to select the input source.
• The image and sound from the selected source
are output on the TV.
• You can also select the input source by pressing
a/b.
2011-6-13 17:20:12 2011-6-13 17:20:12