Watching Tv; Daily Operation; Selecting An External Video Source; Changing Channels - Sharp AQUOS LC-60LE841E Operation Manual

Watching TV

Daily operation

Switching on/off
Turning on/off the power
Turn on (;)/off (a) the MAIN POWER switch on
1
the rear of the TV (Page 7).
To turn on/off the TV, press a on the TV or >a
2
on the remote control unit.
NOTE
• When turning off the power using the MAIN POWER
switch on the rear of the TV, EPG data will be lost.
Standby mode
E
To standby mode
If the MAIN POWER switch on the rear of the TV is
turn on (;), you can switch it to standby by pressing
a on the TV or >a on the remote control unit.
E
Switching on from standby
From standby, press a on the TV or >a on the
remote control unit.
NOTE
• If you are not going to use this TV for a long period of
time, be sure to remove the AC cord from the AC outlet
or turn off (a) the MAIN POWER switch on the rear of
the TV (Page 7).
• A small amount of electric power is still consumed even
when the MAIN POWER switch is turned off (a) (Page 7).
Switching between digital, satellite*
and analogue broadcasts
Watching digital Watching analogue
broadcasts broadcasts
Watching satellite
broadcasts
*Important information:
Satellite services are only available for the 840 model
series.
NOTE
• If multiple satellite services are set, each time you press
the SAT button the channel switches as follows.
SAT1 SAT2
SAT4

Changing channels

With :r/s
With 0_9
18

Selecting an external video source

Once the connection is made, press b to display
the "INPUT" screen, and then press b or a/b to
switch over to the appropriate external source with
;.
NOTE
• You can also select an external video source from
"HOME" > "Input change".
• Only HDMI inputs which are not set for "Input skip"
(Page 41) and properly connected inputs can be selected.
SAT3
CH list
INPUT
TV
Switchable