Contactless Key - Sharp UP-820F Instruction Manual

■ Contactless key

You can program a clerk code for each contactless clerk key, and confirm the clerk name.
When you perform this programming, the corresponding contactless key must be set to the clerk switch.
You can program the same clerk code for two or more contactless clerk keys.
Procedure
▼
Entering the clerk code and
E
pressing the key
▼
▼
Confirmation of the clerk name and
c
pressing the key
▼
When you continue the
programming, set another
contactless key to the clerk switch.
When you finalize the
programming, press the
170
Program each item as follows:
• CLERK CODE (Use the numeric entry)
Clerk code (max. 4 digits: 0001 to 9999)
The entry of "0" disables the use of contactless clerk keys.
• CLERK NAME (Use the character entry)
Clerk name (max. 12 characters)
NOTE
When you confirm a clerk code and clerk name for each
contactless clerk key, perform the program reading sequence "25
CONTACTLESS KEY" of the section "Reading of Stored
Programs".
C
key.