Error Log Messages; Ethernet Messages - IBM eServer xSeries 440 Quick Reference

Error log messages

Machine Check Architecture (MCA) with BIOS 1.02 or earlier
Description: The microprocessors or SMP Expansion Modules are disabled when the
following MCA message appears in the error log of xSeries 440 servers running BIOS 1.02 or
earlier:
Error Code: 00151200 MCA: Unrecoverable Error Detected
Error Code:
Error Data: ProcID=08
Error Data:
Entry Number: 5
Solution: Download and install the xSeries 440 BIOS Update version 1.03 or later. You can
obtain the BIOS update at http://www.ibm.com/pc/qtechinfo/MIGR-42518.html/.
MCA is still a valid error message that can appear if a problem occurs. BIOS Update version
1.03 corrects the specific problem described above.
For more information: See Tip H176213 at http://www.ibm.com/pc/support/.

Ethernet messages

PRO/1000 XT Gigabit Ethernet: NMI error or dropped connection
Description: Nonmaskable Interrupt (NMI) errors or dropped network connections can occur
if an Intel
Note: For additional information about NMI error messages, see "Nonmaskable Interrupts
Known configuration: An IBM xSeries 440, type 8687 server (any model) with an Intel
PRO/1000 XT server adapter (option part number 22P6801, FRU part number 22P6809)
installed. An IBM RXE-100 Remote Expansion Enclosure, Type 8684, model 1RZ is attached
to the server.
Solution: Move the PRO/1000 XT adapter to a slower PCI slot. The xSeries 440 server sup-
ports six hot-plug 64-bit adapters in the expansion slots as follows:
Slot 1
Slot 2
Slot 3
Slot 4
Slot 5
Slot 6
For more information: See Tip H033438 at http://www.ibm.com/pc/support/.
6
Hints, Tips, and Frequently Asked Questions for the xSeries 440:Quick Reference
®
PRO/1000 XT server adapter is installed in any of the 133 MHz slots in the server.
(NMI)" on page 22.
66 MHz
66 MHz
100 MHz (133 MHz if Slot 4 is empty)
100 MHZ (133 MHz if Slot 3 is empty)
133 MHZ
133 MHz