Sharp MX-M753U Start Manual page 48

SPECIFICATIONS
Machine specifications / copier specifications (Continued)
Tray 4
Bypass tray
Duplex module
Output tray
(Centre tray)
Interface port
Required power supply
Power consumption
Dimensions
Weight
Overall dimensions
*1 The following paper sizes can be used: A4, B5, 8-1/2" x 11", 16K, Custom size (only A4, 8-1/2" x 11" for tab paper)
*2 The following paper sizes can be used: A4, B5, 8-1/2" x 11",16K
*3 Type A connectors are located on the front of the machine and on the right side of the machine at the back (total of two
connectors. Do not use the connectors simultaneously.
To receive power supplied from a type A connector, the total current consumption of the connected device should not exceed
500 mA.
46
Paper sizes: A3, B4, A4, A4R, B5, B5R, 11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5",
8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 7-1/4" x 10-1/2"R, 8K, 16K, 16KR (Includes
automatic paper size detection function.)
Paper weight: Plain paper (60 g/m
2
209 g/m
Paper capacity: Plain paper (80 g/m
Paper types: SHARP-recommended plain paper, recycled paper, coloured paper, and heavy paper*
Paper sizes: A3, B4, A4, A4R, B5, B5R, A5R, 11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2",
8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 7-1/4" x 10-1/2"R,
5-1/2" x 8-1/2"R, 8K, 16K, 16KR (Includes automatic paper size detection function.
Entry of paper sizes up to 297 mm x 432 mm (11-5/8" x 17") is possible.)
Paper weight: Thin paper (56 g/m
(16 lbs. to 28 lbs.)), heavy paper (106 g/m
index))
Paper capacity: Standard paper 100 sheets
Paper types: SHARP-recommended plain paper, recycled paper, coloured paper, heavy paper*
thin paper, transparency film*
Paper sizes: A3, B4, A4, A4R, B5, B5R, A5R, 11" x 17", 8-1/2" x 14", 8-1/2" x 13-1/2",
8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 7-1/4" x 10-1/2"R,
5-1/2" x 8-1/2"R, 8K, 16K, 16KR
Paper weight: Plain paper (60 g/m
2
209 g/m
Paper types: SHARP-recommended plain paper, recycled paper, coloured paper, and heavy paper
Output method: Face-down output
Output capacity: 250 sheets (using SHARP-recommended A4 or 8-1/2" x 11" paper)
(The maximum number of sheets that can be held varies depending on ambient conditions in the
installation location, the type of paper, and the storage conditions of the paper.)
Tray full sensor: Yes
LAN connectivity: 10Base-T / 100Base-TX / 1000Base-T
USB connectivity: Type A connector supports USB 2.0*
Compatibility requirements of USB memory
Disk Format: FAT
Type B connector supports USB 2.0 (Hi speed)
Local voltage ±10% (For the power supply requirements, see the name plate in the lower corner of the
left side of the machine.)
1.8kW
728 mm (W) x 683 mm (D) x 1213 mm (H) (28-42/64" (W) x 26-57/64" (D) x 47-48/64" (H))
Approx. 190 kg (419 lbs.)
1026 mm (W) x 683 mm (D) (40-25/64" (W) x 26-57/64" (D)) (when bypass tray is extended)
2 2
to 105 g/m (16 lbs. to 28 lbs.)), heavy paper (106 g/m
(28 lbs. bond to 110 lbs. index)
2
(21 lbs.)) 500 sheets, heavy paper 80 sheets
2 2
to 59 g/m (15 lbs. to 16 lbs.)), plain paper (60 g/m
1
, labels*
2 2
to 105 g/m (16 lbs. to 28 lbs.)), heavy paper (106 g/m
(28 lbs. bond to 110 lbs. index))
2 2
to 209 g/m (28 lbs. bond to 110 lbs.
1 1
, and tab paper*
3
2
to
2
2 2
to 105 g/m
1
,
2
to