Emission Of Noise And Chemicals - Sharp MX-2310U Start Manual

Emission of noise and chemicals

Noise emission values
Noise emission values as measured according to ISO7779 are listed to the
right.
Emission density (measured according to RALUZ122: Edition Jun.2006)
Measured chemicals Condition of copier
Ozone
Dust
When copier is in
Styrene
operation
Benzene
TVOC
When on standby
Colour mode Diffusion speed
Colour 3.0 mg/h or less
Black and white 1.5 mg/h or less
Colour
4.0 mg/h or less
Black and white
Colour 1.8 mg/h or less
Black and white 1.0 mg/h or less
Colour
0.05 mg/h under
Black and white
Colour 18 mg/h or less
Black and white 10 mg/h or less
- 2.0 mg/h or less
Sound power level L d
WA
Printing mode
7.5 B
(continuous printing)
Standby mode
3.6 B
(Low power level mode)
Sound pressure level LpA (actual measurement)
Bystander positions 50 dB(A)
Printing mode
(continuous printing)
Operator positions 52 dB(A)
Bystander positions 19 dB(A)
Standby mode
Operator positions 19 dB(A)
10