Interfaces And Connections; Interfaces - Siemens SIMATIC IPC347G Operating Instructions Manual

Hide thumbs Also See for SIMATIC IPC347G:
Table of Contents

Advertisement

Product description
1.4 External design of the device
1.4.4

Interfaces and connections

1.4.4.1

Interfaces

Note
You can find the detailed information on interfaces under "External interfaces (Page 104)".
Interfaces at rear of device
Mouse port
COM1 X30
COM2 X31
VGA X70
LAN2
LAN1
Line in (blue)
Line out (green)
Microphone (pink) Connection for microphone, 3.5 mm phono jack
USB 3.0
DP port X71
Keyboard port
See the pin assignment below.
1
Each of the USB port can be disabled/enabled separately by disabling/enabling its associated
2
USB port in BIOS. On how to disable the USB port, see USB configuration in Advanced menu
(Page 86).
Use the DP cable of which the length is less than 15 meters, and the DP cable must comply
3
with VESA DisplayPort standard.
14
Connection for a PS/2 mouse
Serial interface, 9-pin RS232 /RS422 /RS485
Connection for monitor with Video Graphics Adapter (VGA) interface
X2P1
RJ-45 Ethernet Port for 10/100/1000Mbps LAN, the MAC-Address is
1
listed in Component label.
X1P1
RJ‐45 Ethernet Port for 10/100/1000Mbps LAN, the MAC-Address is
1
listed in Component label.
Connection for analog audio source, 3.5 mm phono jack
Connection for active speakers or headset, 3.5 mm phono jack
Connections for USB devices, compatible with USB 2.0/1.1
2
Connection of a digital monitor
Connection for a PS/2 keyboard
3
Operating Instructions, 10/2020, A5E50059993-AA
SIMATIC IPC347G

Advertisement

Table of Contents
loading

Table of Contents