Panasonic LFE Series User Manual page 14

6. Deliver content on USB memory via LAN
6.1 Deliver content
7-2. Deliver content list. (Multi-Playback)
*Refer to 7-1 (page 13) for Single-Playback
*While the content is being delivered, the display screen will go dark and the message [Content is being
rewritten] will appear on the upper right.
*When the data size of the content list is large, it takes time to deliver. We recommend you to set an earlier
time, calculating back from the time you want to start playback.
*Light ID transmission function for SF1H series is not supported.
Set up delivery on each registered display.
(1) Select [Delivery content list].
Registered content lists can be selected from the pull-down menu.
(2) Set [Playback mode setting].
- Single-Playback: No synchronous play on each display
- Multi-Playback: Synchronous play on each display
Select Multi-Playback at this time.
(3) Under "Parent", put a check the display that will be the parent.
Content changes according to the play duration of the parent display.
(4) Select "Group number".
Set the display for synchronized playback to the same group.
(5) Click [Deliver].
(6) When delivery is completed, a "successful" message will appear on the bottom of the screen.
When it fails, an "error" message will appear.
*When there are different content lists to be distributed in the same group, the play duration (sec.) of the parent
display set in step (3) is prioritized as the play duration of each content item.
*The maximum number of devices for content delivery at one time is 128 units.
If you want to deliver to more devices, complete delivery to the first 128, and then start the rest.
When the content list delivery is completed, play will start.
(6)
(1)
(2) (3) (4)
(5)
14