Panasonic LFE Series User Manual page 11

6. Deliver content on USB memory via LAN
6.1 Deliver content
2. Connect display and PC with a LAN cable.
(1) Connect the PC that will run MMCS, and the display to be used, with the LAN cable.
(2) When using multiple displays, connect them via HUB.
(3) Plug the USB memory into the display beforehand.
3. Set up computer.
Access [Network and sharing center] and set the IP address of the wired LAN.
Set the IP address to be in the same network as that shown on the network status of the display.
Personal computer
4. Activate Multi Monitoring & Control Software (MMCS).
(1) Download Multi Monitoring & Control Software
and install it on the computer.
Download from here
⇒https://panasonic.net/cns/prodisplays/download/software/index.html
(2) Activate MMCS.
5. Register the display.
(1) Click [File].
(2) Click [Create New Device].
⇒Device creation screen will appear.
*After MMCS is activated, it will take a little time
before [Create New Device] becomes active.
(3) Enter the IP address to be used for the display.
(4) Enter the user name and password.
Default settings
Except for SF2 series
User name admin1
Password panasonic
(5) Click Test.
(6) When successfully completed, the following message
will appear. Click OK.
Cancel
(MMCS) from the Website
(1)
SF2 series
dispadmin
@Panasonic
*****
Network status of the main display
Example
(2)
11
(3)
**
(4)
*****
*****
(5)