GETTING STARTED
Battery Removal and Installation
1. Make sure the unit is turned Off.
2. Find the batter y cover on the
bottom of the truck. Use a coin or a
screwdriver to loosen the screw and
open the battery cover.
3. Remove old batteries by pulling up
on one end of each battery.
4. Install 2 new AAA (AM-4/LR03)
batteries following the diagram inside
the battery box.
5. Replace the battery cover and
tighten the screw to secure.
BATTERY NOTICE
•
Use new alkaline batteries for maximum performance.
•
Use only batteries of the same or equivalent type as
recommended.
•
Do not mix different types of batteries: alkaline, standard
(carbon-zinc) or rechargeable, or new and used batteries.
•
Do not use damaged batteries.
•
Insert batteries with the correct polarity (+ and -).
•
Do not short-circuit the battery terminals.
•
Remove exhausted batteries from the toy.
•
Remove batteries during long periods of non-use.
•
Do not dispose of batteries in fire.
•
Do not charge non-rechargeable batteries.
•
Remove rechargeable batteries from the toy before charging
(if removable).
•
Rechargeable batteries are only to be charged under
adult supervision.
DO NOT USE RECHARGEABLE BATTERIES.
4
4
4