Setup; Unfolding The Handle - Toro 29732 Operator's Manual

117-4143
1. Warning—read the Operator's Manual.
2. Thrown object hazard—keep bystanders a safe distance
away from the machine.
3. Cutting/dismemberment hazard of hand or foot, mower
blade—disconnect the spark-plug wire and read the
instructions before servicing or performing maintenance.
4. Cutting/dismemberment hazard of hand or foot, mower
blade—stay away from moving parts and keep all guards
and shields in place.
5. Cutting/dismemberment hazard of hand or foot, mower
blade—do not mow up and down slopes, only mow across;
stop the mower and shut off the engine, pick up debris
before operating; look behind and down when reversing.

Setup

Important:
plastic sheet that covers the engine and any other
plastic or wrapping on the machine.
Important:
insert the key into the electric-start ignition until
you are ready to start the engine (electric-start
model only).
1
decal117-4143

Unfolding the Handle

No Parts Required
Procedure
WARNING
Folding or unfolding the handle improperly
can damage the cables, causing an unsafe
operating condition.
• Do not damage the cables when folding or
unfolding the handle.
• If a cable is damaged, contact an
Authorized Service Dealer.
1. Remove the handle knobs and bolts from the
machine housing
2. Attach the handle to the machine housing
(Figure
4
Remove and discard the protective
To prevent accidental starting, do not
(Figure 3).
3).