Whirlpool  WTW8200YW Use And Care Manual page 7

CYCLE GUIDE
Settings and options shown in bold are default settings for that cycle.
For best fabric care, choose the cycle that best fits the load being washed.
If using the Eco Monitor, adjust the temperature and spin speed within that cycle to improve energy usage.
Not all cycles and options are available on all models.
Cycle:
Items to wash:
No clothes in Clean
washer
Washer
affresh
Heavily soiled
fabrics
For models with separate cycle knob positions for Rinse & Spin and Drain & Spin:
Rinse &
Swimsuits, items
that need rinsing
only
Drain &
Wet load of
clothes
For models with a Rinse/Drain & Spin cycle position:
Rinse/Drain
Swimsuits, items
that need rinsing
& Spin
only
Rinse/Drain
Wet load of
clothes
& Spin
* Wash temperatures vary according to the chosen cycle setting. All cycle settings use a cold rinse temperature.
Wash Spin
Temp*: Speed:
with
®
Soak Warm
Cool
Cold
High
Spin Medium
Low
High
Spin Medium
Low
High
Medium
High
Medium
Low
Soil Available
Level: Options:
EcoBoost
Heavy EcoBoost
Normal
Medium
Light
EcoBoost
Fabric Softener
EcoBoost
Fabric Softener
Low
Cycle Details:
Use this cycle every 30 washes to keep the
inside of your washer fresh and clean. This
cycle uses a higher water level. Use with
affresh Washer Cleaner tablet or liquid
®
chlorine bleach to thoroughly clean the
inside of your washer. This cycle should not
be interrupted. See "Washer Care."
IMPORTANT: Do not place garments or
other items in the washer during the Clean
Washer with affresh cycle. Use this cycle
®
with an empty wash tub.
Use this cycle to soak small spots of
set-in stains on fabrics. After time has
expired, washer will drain, but will not
spin and a tone will sound. To set a
follow-up cycle, add additional detergent
and select a cycle based on fabric type.
This cycle uses a high-speed spin.
For some fabrics, you may wish to set
the spin speed to a lower setting.
Use this cycle to spin excess water
out of a load. This cycle drains the water
and spins at a high speed. Spin speed
is adjustable.
This cycle uses a high-speed spin.
For some fabrics, you may wish to set
the spin speed to a lower setting.
To select, choose Rinse/Drain & Spin
and turn off Extra Rinse. Use this cycle
to spin excess water out of a load. This
cycle drains the water and spins at a
high speed. Spin speed is adjustable.
7