Epson EcoTank L455 Start Here page 3

Hide thumbs Also See for EcoTank L455:

Available languages

L455

Start Here

Unpack

Note:

The included ink bottles must be used for product setup and are not for resale.

Caution:

Do not open the ink bottles until you are ready to fill the ink tanks. The ink bottles are vacuum packed to maintain reliability.

Fill ink tanks

Note:

This product requires careful handling of ink. Wear plastic gloves and place a sheet

of paper under the ink tank unit when you fill or refill the ink tanks, as ink may splatter. If

ink spills, wipe it off immediately to avoid permanent stains. If ink gets on your clothes or

belongings, it may not come off.

Adjust the control panel, then

turn on the product.

Load paper

Warning:

Caution:

Replace bottle cap tightly, or

ink may leak.

Select your language, then press

the OK button.

Read these instructions before using your product.

Keep ink bottles out of the reach of children and do not drink the ink.

During initial setup, make sure to use

the ink bottles that came with your

product and use all of the ink.

Fill each tank with the correct ink color.

When you see a message, press the OK button for

3 seconds, then press the

ink. Ink charging takes approximately 20 minutes.

Select the paper settings on the product's control panel.

start button to start charging