Sony XAV-AX210 Service Manual page 11

Hide thumbs Also See for XAV-AX210:
Table of Contents

Advertisement

XAV-AX210
4. After completing the check of step 3, press the [HOME] button
on the main unit, swipe left the touch panel, and touch the [Set-
tings] on the touch panel.
[HOME] button
(Displayed screen in the above fi gure are example)
5. The "General Settings" screen is displayed.
Move down the scrollbar on the touch panel to display the [Fac-
tory Reset], and touch it.
Scrollbar
(Displayed screen in the above fi gure are example)
6. The following screen is displayed, and touch the [Reset] on the
touch panel.
Factory Reset
Do you really want to restore all settings?
Cancel
7. Check that this unit restarts and the logo of "SONY" is displayed
on the screen, then turn the power off.
8. Remove the USB memory and speaker that is connected to this
unit.
This completes the communication check work.
11
Swipe left
Swipe area
Touch the [Settings]
Touch the [Factory Reset]
1:00 AM
Reset
Touch the [Reset]
TOUCH PANEL ADJUST
When the touch panel is replaced, perform the calibration of touch
panel according to the procedure below.
Procedure:
1. Connect the power cord to the regulated DC power supply, and
turn the power on this unit.
2. Press the [HOME] button on the main unit, swipe left the touch
panel, and touch the [Settings] on the touch panel.
[HOME] button
(Displayed screen in the above fi gure are example)
4. The "General Settings" screen is displayed.
Move down the scrollbar on the touch panel to display the
[Touch Panel Adjust], and touch it.
Scrollbar
(Displayed screen in the above fi gure are example)
5. The following left screen is displayed, and continue to touch the
center of " " that is displayed on the touch panel until [Com-
plete] is displayed on the touch panel.
Touch the center of " "
Please touch for adjust.
Cancel
6. Touch the [Complete] on the touch panel to end the calibration.
Touch the [Complete]
Sony CONFIDENTIAL
For Authorized Servicer
Regulated DC
power supply
+
Swipe left
Swipe area
Touch the [Settings]
Touch the [Touch Panel Adjust]
Complete
Complete
SYS SET

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents