Samsung HT-EM35 User Manual page 16

Connections
Connecting to External Devices
To select the correct mode for an external device, press the FUNCTION button. Each time you press the button,
the mode changes in this order : BD/DVD
SPEAKERS OUT
LAN
CENTER FRONT L SURROUND L
SUBWOOFER FRONT R SURROUND R
Red
R
White
W
Method 1 AUX IN : Connecting an External Analog Component
Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out
jack on the external analog component.  Select the AUX mode.
•
Be sure to match the colors on the cable plugs to the colors on the input and output jacks.
Method 2 OPTICAL : Connecting an External Digital Audio Component
To connect the digital audio output of digital signal components such as Cable Boxes and Satellite
Receivers (Set-Top-Boxes).
Using a digital optical cable (not supplied), connect the Optical Digital Audio In jack on the product to the
Digital Optical Out jack of the external digital device using a digital optical cable.
 Select the D. IN mode.
| NOTE |
\ To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.
\ This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.
\ This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported.
16
|
English
HT-EM35_ZA_0227.indd 16 HT-EM35_ZA_0227.indd 16
D. IN AUX
AUX VIDEO
IN OUT
FM ANT
L
OPTICAL
R
DIGITAL
HDMI OUT AUDIO IN
(Cable not supplied.)
Method 1
External Devices
FM
AUX AUX
IN IN
L L
R R
HDMI OUT HDMI OUT
OPTICAL OUT
VIDEO VIDEO
OUT OUT
FM ANT FM ANT
OPTICAL OPTICAL
DIGITAL DIGITAL
AUDIO IN AUDIO IN
(Cable not supplied.)
Method 2
2012-02-27 오전 10:53:55 2012-02-27 오전 10:53:55