Dimplex XLF50 Owner's Manual page 17

Operation
related functions are used, the
Display will indicate "---".
H. Color Themes
Different presets of lighting color
combinations are available in
the unit.
Changed by repeatedly
pressing the corresponding
button on the remote or the
unit.
• Cycles through the different
preset light settings of the
unit, this includes different
combinations of colors of the
flame base and media lighting.
! NOTE: Two of the themes in
the cycle are a prism where the
unit cycles through a variety of
colors. Pressing the
the cycling and holds the unit on
the preferred color, indicated by
a solid circle. When the unit is
on prism, and is cycling through
the colors, a rotating circle will be
displayed.
I. Brightness
Changes the Brightness of the
lights in the unit.
Adjusted by repeatedly pressing
the corresponding button on the
remote or the unit.
• Indicated by the second digit
J.
The Sleep Timer can be set to
automatically shut off the fireplace
after a preset time (from 30
minutes to 8 hours).
• The Display will display the
stops
be cancelled at any time by
pressing the
until the sleep timer displays
nothing.
Resetting the Temperature
Cutoff Switch
Should the heater overheat, an
automatic cut out will turn the
whole unit off and it will not come
back on without being reset. If the
Er2 will be displayed on the unit.
It can be reset by turning the unit
on the Display changing to
show: "H" (high), and "L" (low).
Sleep Timer
To set the timer press the
timer button on the remote,
repeatedly, until the desired
time is displayed.
different times as it is adjusted.
Once the timer has begun,
pressing the
display the time remaining
before the unit turns Off.
! NOTE: The Sleep Timer can
button on the unit is pressed,
button will
button repeatedly
17