ADT Focus 200 Plus User Manual page 77

Trouble or Error Display
Fire, SPV or Holdup points
bypassed.
Cannot turn on! System must
be reset by ADT.
Code incorrect.
Code incorrect. Keyboard
locked. Please wait.
Cannot turn on! Some points
are abnormal.
Too many points bypassed.
Troubleshooting Guide (cont'd)
Description
Some fire, supervisory, or
holdup points are
bypassed.
Your system is
programmed with the
ADT reset option.
User has entered an
invalid ID code.
User has entered 18
incorrect ID code digits.
There are some abnormal
protection points within
the group you selected.
Bypass warning. Too
many points are
bypassed, which may
compromise building
security.
Action
•
Check with your ADT
Service Representative to
determine when they will
be restored.
•
Contact your ADT Service
Representative to reset
your system.
•
Press "Try again" button
and re-enter a valid 6-digit
ID code.
•
Wait 60 seconds for the
operating panel lockout to
expire and re-enter a valid
ID code.
•
Press "See points" button.
•
Inspect and secure (return
to normal) these points
befroe turning this group
on.
•
If you do not have bypass
capability, check with your
Security Manager before
proceeding.
•
If you have bypass
capability, unbypass some
of these points before
turning the system on.
– 77 –