Haier HWD100-BP14636 User Manual page 11

EN
3.5.1-Function button „Temp."
Press this button (Fig. 3-5.1) to change the washing
temperature of the programme. If no value is illumi-
nated the temperature will be 0 °C.
In conjunction with the "Intense" button, the child lock
function can be switch on/off (see CHILD LOCK).
3.5.2-Function button "Speed"
Press this button (Fig. 3-5.2) to change or deselect
the spin of the programme. If no value is illuminated
the laundry will not spun.
3.5.3-Function button "Intense"
This function (Fig. 3-5.3) intensifies cleaning results.
Preferable if laundry is heavily soiled. This extends the
washing time in the main wash cycle.
In conjunction with the "Temp." button, the child lock
function can be switch on/off (see CHILD LOCK).
3.5.4-Function button"6+6 kg"
Press this button (Fig. 3-5.4) in order to activate /de-
activate the drying function. This allows washing and
drying of maximum 5 kg laundry without interruption.
By pressing the button sequentially, drying time can be
set( 30, 60, 90 or 120 minutes). If the display shows 0 or
no value, the drying function is deactivated.
In combination with programme DRY this function sets
the drying time.
Drying function is not applicable to all programmes
(see PROGRAMMES).
Note: 6+6 kg
Do not overload. Combination of washing and drying cycle only allows a maximum loading
of 6 kg.
3.5.5-Function "Speed up"
This function saves time and energy. Preferable if
laundry is slightly soiled. Press simultaneously button
„6+6 kg." and "Delay" (Fig. 3-5.5) for about 3 seconds
to activate the "Speed up" function; SPEEd uP is dis-
played. This function is not available in all programmes
(see PROGRAMMES).
3- Control panel
3-5.1
Temp.
Temp.
Speed
6+6kg
3-5.2
5+5 kg
Schleudern Intensiv
Temp.
Speed Intensiv
3-5.3
5+5 kg
Intense Zeitvorwahl
Kurz
3-5.4
6+6kg
3-5.5
Delay
Zeitvo
5+
Kurz
11