3.0 Chapter 3.
Installing the 7131 Storage Tower
This chapter includes guidelines for:
Placing the 7131 Storage Tower
Setting the address jumper for a second 7131 Storage Tower
Shutting down the system
Connecting the SCSI signal cable
Setting the voltage selection switch
Connecting the line cord
Powering on the 7131 Storage Tower
Verifying 7131 Storage Tower installation
The last section in this chapter describes guidelines for relocating the 7131 Storage Tower.
Observe all safety notices when installing or relocating a 7131 Storage Tower. For a translation of a safety notice, see the safety notice
with a matching reference number, for example (RSFTD201), in External Devices Safety Information, SA26-7003.
Subtopics
3.1 Placing the 7131 Storage Tower
3.2 Setting the Address Jumper for a Second 7131 Storage Tower
3.3 Shutting Down the System
3.4 Connecting the SCSI Signal Cable
3.5 Setting the Voltage Selection Switch
3.6 Connecting the Line Cord
3.7 Powering On the 7131 Storage Tower
3.8 Verifying 7131 Storage Tower Installation
3.9 Relocating the 7131 Storage Tower
7131-105 User's Guide
Chapter 3. Installing the 7131 Storage Tower
¦ Copyright IBM Corp. 1995, 1996
3.0 - 1