Diskette Drive Controller - IBM PS/2 95 XP 486 Hardware Maintenance Reference

IBM PS/2 Model 95 XP 486 HMR
Diskette-Drive Controller
1.2.7 Diskette-Drive Controller
The controller connects to the diskette drives through a single 40-pin
cable on the system board. Signals and voltages are supplied through the
diskette-drive cable that plugs into the connector. These signals and
voltages can operate two 3.5-inch diskette drives and one 5.25-inch drive.
¦ Copyright IBM Corp. 1990, 1991
1.2.7 - 1