IBM PS/2 35 SX Hardware Maintenance Reference page 35

6.2 1010 Adapters
Cover (1005)
Note: Before replacing an adapter, note the locations of the adapter and
cables. When replacing an adapter, install the replacement adapter
in the same slot as the adapter that was removed.
Stored configuration information depends on the location of the
adapter. If the replacement adapter is installed in a different
location, run the set configuration program on the user's Starter
Diskette to reset the system-configuration information.
IBM PS/2 Model 35 SX, 35 LS, 35 SLC HMR
1010 Adapters
PICTURE 5
¦ Copyright IBM Corp. 1991, 1992
6.2 - 1