Table of Contents
Advertisement
2.2.6 Error Log
The following steps allow you to create an Error Log, start the advanced
diagnostic tests, select System Checkout, and automatically record error
messages in the Error Log.
diagnosing an intermittent problem or exercising the system.
You cannot log errors to a diskette drive that is being tested.
plan to test a diskette drive, you must log the errors to the primary
printer or to a diskette drive not being tested.
To create the Error Log:
1.
Start the advanced diagnostic tests.
2.
Select System Checkout.
3.
Select Error Log.
4.
Follow the instructions on the screen.
IBM HMR Diagnostics for Micro Channel
Error Log
This procedure is normally used when
¦ Copyright IBM Corp. 1990
2.2.6 - 1
If you
Advertisement
Table of Contents
