Table of Contents
Advertisement
Connecting Cable TV and VCR
You can connect different cable systems to your TV, including cable without a cable box, and
cable with a cable box that descrambles some or all channels.
Cable without a Cable Box
If you want to connect cable, and you do not need to use a cable box:
1
Plug the incoming cable into the "Cable IN" terminal
on the rear panel.
Cable with a Cable Box that Descrambles All Channels
1
Find the cable that is connected to the ANTENNA
OUT terminal on your cable box. This terminal might
be labeled "ANT OUT", "VHF OUT" or simply,
"OUT".
2
Connect the other end of this cable to the "Cable IN"
terminal on the rear panel.
Connecting an Analog Cable Converter Box
This connection allows you to watch cable and premium channels. You should keep your
TV selected to "Cable IN" so that you can use the TV features. When viewing premium
channels, select "Air IN" and tune the TV to channel 3 or 4 (whichever channel is vacant in
your area), then use the converter box to change channels. You will need two coaxial
cables.
From
Cable
When you use a converter box
●
with your TV, there may be
features that you can not
program using the remote
control, such as programming
your favorite channels and
blocking channels.
The output from "Cable Out" is
●
not available when "Air/CATV"
is set to "Cable" in the PIP
menu.
English-3
Advertisement
Table of Contents
