Samsung HP-S4253 Owner's Instructions Manual page 43

Setting Up the Remote to Operate Your DVD
Turn off your DVD.
1
Press the DVD button on your TV's remote control.
2
Press the SET button on your TV's remote control.
3
Using the number buttons on your remote control, enter
4
three digits of the DVD code listed on page 47 of this
manual for your brand of DVD. Make sure you enter three
digits of the code, even if the first digit is a "0". (If more
than one code is listed, try the first one.)
Press the POWER (
5
Your DVD should turn on if your remote is set up correctly.
If your DVD does not turn on after set-up, repeat steps 2, 3
and 4, but try one of the other codes listed for your brand
of DVD. If no other codes are listed, try each code, 000
through 141.
Note on Using Remote Control Modes: DVD
When your remote control is in "DVD" mode, the volume buttons still
control your TV's volume.
) button on the remote control.
43