If the installation screen for the
・
terminal's driver software appears on
your PC, please wait a moment for the
installation to complete.
When the confirmation screen of
・
installing software appears on the
terminal, tap [SKIP] or [CANCEL].
When charging is complete,
3
remove the USB plug of the USB
cable A to C from the USB port of
PC and then remove the Type-C
plug horizontally from the
terminal.
❖ Note
Do not connect the Type-C plug of the USB cable A
・
to C forcibly. Wrong connection may cause damage.
Turning power on/off
Turning power on
Press and hold the power key for at
1
least 1 second.
The terminal vibrates and the lock
・
screen appears after a while.
When you first turn on the power and
・
"
(Welcome)" is displayed,
ようこそ
follow the onscreen instructions to
make initial settings (P.46).
Cancel the screen lock.
2
The Home screen appears.
・
Canceling the screen lock (P.45).
・
Before Using the Terminal
44