External Device Connection; Connecting To Pc - Sony NTT docomo SO-01M Instruction Manual

External device connection

Connecting to PC

Connect to a PC to exchange data between
the internal storage or the microSD card and
a PC.
❖ Information
Appeared screen may vary depending on the
･
operating system (OS) of a PC.
You may not be able to operate copyrighted data of
･
images, music, etc.
Connecting to PC with USB
cable A to C
The following operating systems (OS) are
･
supported.
- Microsoft Windows 10
- Microsoft Windows 8.1
- Microsoft Windows 7
To operate on Mac, downloading "Xperia
･
Companion" is required.
For details on compatible models or
recommended system, see the following
website.
https://www.sonymobile.co.jp/support/
software/xperia-companion/ (in Japanese
only)
Connect the terminal to a PC with
1
USB cable A to C 01 (optional) etc.
(P.43).
When a screen for installing driver
･
software appears, wait for a while until
the installation is complete.
When the confirmation screen of
･
installing software appears on the
terminal, tap [SKIP] or [CANCEL].
[ALLOW].
2
The terminal is displayed on the PC
･
screen as a portable device and you can
access the internal storage and a
microSD card in the terminal.
Tap [DENY] to only charge the terminal.
･
❖ Information
To change the USB connection mode, drag the status
･
u
bar down Tap the notification of USB connection
mode and then select a USB connection mode.
External device connection
220