Samsung SCH-r610 Series User Manual page 96

Note: You can also set your phone to start VoiceSignal when you open the phone. See "Voice Launch" on
page 100 for more information.
The following voice commands appear in the display:
Call <Name or #> — Lets you dial the phone by saying any name stored in your
•
contact list, without ever having to record, or "train" that name. VoiceSignal
automatically voice-activates all your contacts, even if you have hundreds of them
stored on your phone. You can also dial any telephone number, even if it is not
stored in your contact list, by saying the digits in the number. (See "Voice Dialing"
on page 29 for more information.
Send Text <Name> — Lets you access Create Text Message.
•
Send Picture <Name> — Lets you access Create Picture Message.
•
Lookup <Name> — Lets you find a Contact by name and review the Contact's
•
information.
Go to <Menu> — Lets you access the following list of your phone's features and
•
functions:
Recent Calls
–
Messages
–
Contacts
–
Multimedia
–
Browser
–
Games & Apps
–
Tools
–
Voice SVC
–
Settings
–
Check <Item> — Lets you say a single command (such as "Status") to verify your
•
phone's: Status, Signal, Network, Battery, or My Phone #.
Note: Speaking clearly, say the command that you want to use. If VoiceSignal does not recognize a
command, it prompts you to repeat the command. If VoiceSignal still does not recognized the
command, it tells you "Sorry, no match found" and cancels voice recognition.
Voice Command Tips:
Make sure you wait for the beep before speaking.
•
Speak clearly at a normal volume, as if you were talking on the phone.
•
96