Samsung SCH-r610 Series User Manual page 30

Voice Dialing Tips:
Wait for the beep before speaking.
•
Speak clearly at a normal volume, as if you were talking to someone on the phone.
•
When saying a name, say the first name then the last name.
•
Dialing a Name
To dial a name, do the following:
In standby mode, press and hold the
1.
"Say a Command" appears in the display and is pronounced through the
earpiece.
Say, "Call".
2.
You are prompted to "Say the name or #".
Speak clearly and say the name of a person in your Contacts list, first
3.
name followed by last name.
If the name is recognized, Voice Dial repeats the name and dials the
number.
If Voice Dial is not sure which name you said, it displays a choice list of up
to three names and prompts you with "Did you say?" followed by the first
name on the list.
Say "Yes" to confirm the name or "No" to hear the next name, or use the
4.
keypad to select the correct name from the list. (See See "Choice Lists" on
page 97, for more information.)
• Press the Repeat (right) soft key (
• Press the Settings (left) soft key (
to exit VoiceSignal without dialing.
If the recognized name has multiple numbers stored for it (that is, Mobile,
Work, Home, and so on), Voice Dial displays the possible choices and
prompts you with "Which number?"
Say one of the following number types:
5.
• "Home"
• "Work"
• "Mobile"
• "Pager"
Voice Dial dials the specified number.
30
key.
) to say the name again.
), then press the Exit (right) soft key ( )