Samsung SCH-r610 Series User Manual page 58

Use the navigation keys to highlight the entry and press the
2.
View Contact screen appears in the display showing the highlighted
entry's information.
Use the navigation keys to review the information for the entry that you
3.
wish to change, then press the EDIT key (
appears in the display.
Use the navigation keys to highlight the particular information you want to
4.
add or change.
• Press
• Press and hold
• Press the Options (right) soft key (
display:
– Set Speed Dial / Remove Speed Dial — Assign/remove a speed dial number
(see "Speed Dial" on page 63 for more information).
– Set As Default — Set the number the phone will dial when Contracts dialing,
speed dialing, or voice dialing.
– 2-Sec Pause — A 2-second pause after which dialing resumes (see "Add
Pauses to Contacts Numbers" on page 58 for more information).
– Wait — A hard pause (waits for input from you).
Use the navigation keys to highlight the desired option, then press the
When you're finished changing the contents of a field, press the
5.
Your changes are saved and a confirmation message appears in the
display.
Add Pauses to Contacts Numbers
Calls to automated systems such as banking services often require a password or
account number. Instead of manually entering these numbers, you can store them in
a Contacts entry with the phone number and with special characters called pauses,
up to a maximum of 32 digits.
Wait — Stops the calling sequence until the phone receives further input.
•
2-Sec Pause — Stops the calling sequence for two seconds, then sends the
•
remaining digits.
Note: You can enter multiple Waits to extend the length of a pause. For example, two consecutive Waits
cause a total pause time of four seconds. Keep in mind that pauses count as digits towards the 32-
digit maximum.
58
to backspace and delete numbers or letters.
to clear all numbers or letters in the highlighted field.
). The Edit Contact screen
). The following options popup in the
key. The
key.
key.