Digit Dialing - Samsung SCHR500 User Manual

• Always Off—VoiceSignal never displays a choice list.
Select the preferred setting.
2.
Sensitivity
From the Voice SVC menu, select Voice Settings
1.
Sensitivity. The Sensitivity screen appears in the display.
Use the Up and Down navigation keys to adjust the
2.
Sensitivity setting to Reject More spoken commands or
names or to Reject Less spoken commands or names.
Press to accept the new setting.
3.

Digit Dialing

If you regularly have trouble with VoiceSignal not recognize the
numbers you say, try adapting digit dialing to your voice.
Adapting can improve the accuracy of digit recognition,
especially for people with strong regional accents.
Note: After you adapt Digit Dial, your phone is customized to your voice, and
your voice only. Others will not be able to use it unless they reset the
phone to factory defaults.
Adaptation involves recording several sequences of four digits
each. The recording process takes about a minute.
Tips for Adapting Digit Dialing
Use Adapt Digits in a quiet place.
•
105
Make sure you wait for the beep before starting to speak.
•
Speak clearly, and say each digit distinctly.
•
If you make a mistake while recording a sequence of digits, or if there
•
is an unexpected noise that spoils the recording, re-record that
➔
sequence.
Only adapt digits if you are regularly having problems with digit dialing.
•
Once you adapt, digit dialing will not work as well for other people
using your phone. (You can always reset digit adaptation to its original
state, as described below.)
Adapt Digits
To adapt digit dialing, do the following:
From the Voice SVC menu, select Voice Settings
1.
Dialing
sequence and "Please say" plays through the speaker.
Wait for the beep and say the digits using your normal tone
2.
of voice. After a moment, the phone plays back the
recording and prompts "Did the recording sound ok?"
• If the recording was good, say "Yes."
• If you need to re-record, say "No."
If you say "No," the phone prompts you to pronounce the
digits again. Wait for the beep and then say the digits.
Repeat this step until you're satisfied with the recording.
➔
Adapt Digits. Your phone displays the first digit
➔
Digit