Table of Contents
Advertisement
Call functions
4-digit dialing
You can quickly dial a phone number in Contacts
by entering its last 4 consecutive digits. This
feature is convenient if you have the number
memorized, but you have forgotten where the
number is stored in your Contacts.
1. Enter the last 4 digits of the phone number you
want to dial.
2. Press the Menu soft key and select the 4-digit
Dial option. The phone displays the phone
number that matches the four digits.
If the phone found more than one number that
contains those four digits, it displays the first
number. Scroll through the numbers using
or
to select a number.
3. Press
to dial the number.
Pause dialing
When you call an automated system, like a
banking service, you are often required to enter a
password or account number. Instead of manually
entering the numbers each time, you can store
the numbers in your Contacts, separated by
pauses.
There are two kinds of pauses that can be entered
on your phone:
28
• Hard pause: A hard pause stops the dialing
sequence until you press
.
• 2-sec pause: A 2-second pause stops the
dialing sequence for 2 seconds and then
automatically sends the remaining digits.
Note: Multiple two second pauses can be entered to
extend the length of a pause. Keep in mind
that pauses count as digits towards the 32
digit dialing maximum.
Storing pauses in a Contacts entry
To store a number in your Contacts that contains
pauses:
1. Enter the phone number you want to store,
such as the bank's teleservice phone number.
2. Press the Menu soft key to access the options.
3. Select the required pause type and press
• Press
for Hard Pause. The letter "P"
displays, meaning that a hard pause will
occur at that point in the dialing sequence.
• Press
for 2sec Pause. The letter "T"
displays, meaning that a 2-second pause will
occur at that point in the dialing sequence.
Call functions
.
29
Advertisement
Table of Contents
