Getting Started; Battery Removal And Installation - VTech Sparklings Paige Parents' Manual

GETTING STARTED

The batteries included are for demo purposes only. Please replace
the low-capacity Try Me batteries with new batteries for the best
performance. Slide the Demo/Off/On Selector to the On position
to start.
NOTE
Playing at close range for a prolonged period of time may cause
fatigue or discomfort. We recommend that children take a 15-minute
break for every hour of play.

Battery Removal and Installation

1. Make sure the unit is turned Off.
2. Find the battery cover located on the back of the unit, use a
screwdriver to loosen the screw and then open the battery box.
3. Remove old batteries by pulling up on one end of each battery.
4. Install 2 new AAA (AM-4/LR03) batteries following the diagram
inside the battery box.
5. Replace the battery cover and tighten the screw to secure.
4