1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Digital Camera
  5. EC-L200ZSBA
  6. User manual

Samsung EC-L200ZSBA User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for Samsung EC-L200ZSBA

Summary of Contents for Samsung EC-L200ZSBA

  • Page 2 (e.g. for a trip or an important event) to avoid disappointment. Take a picture. (p.20) Take a picture Samsung takes no responsibility for any loss or damage that may result from camera malfunction. Keep this manual in a safe place.
  • Page 3 Switch off the camera, and then disconnect the power source. You must Battery and camera may become hot during prolonged use and it may contact your dealer or Samsung Camera Service centre. Do not continue result in camera malfunction. Should this be the case, allow the camera to to use the camera as this may cause a fi...

  • Page 4: Table Of Contents

    Caution Content CAUTION indicates a potentially hazardous situation which, if not avoided, READY System chart may result in a minor or moderate injury. Included items Leaking, overheating, or damaged battery could result in fi re or injury. Optional Items - Use battery with the correct specifi cation for the camera. Identifi...
  • Page 5 Content How to use the SCENE modes Metering How to use the MOVIE mode Drive mode Recording the movie without sound Pausing while recording a movie (Successive White balance Recording) Exposure compensation 25 Things to Watch Out for When Taking Pictures Movie frame stabiliser 26 Setting up the recording function using the camera 44 Setting up the recording function using the LCD...
  • Page 6 Content Info / Up button Copy To Card Play & Pause / Down button 66 PictBridge Left / Right / Menu / OK button 67 PictBridge : Picture Selection Printer button 68 PictBridge : Print Setting Delete button 68 PictBridge : Reset E (Effect) button : Resize E (Effect) button : Rotating an image SETUP...
  • Page 7 84 Removing the removable disk 85 Setting up the USB Driver for MAC 85 Using the USB Driver for MAC 86 Removing the USB Driver for Windows 98SE 86 Samsung Master APPENDIX 89 Specifi cations 92 Important notes 94 Warning indicator...

  • Page 8: System Chart

    System chart Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre. Included items Rechargeable battery...

  • Page 9: Identifi Cation Of Features

    Identifi cation of features Front & Top Mode dial Power button Shutter button Microphone Speaker Flash AF sensor/Self-timer lamp USB / AV connection terminal Lens/ Lens cover...

  • Page 10: Back

    Identifi cation of features Back Camera status lamp Zoom T button (Digital zoom) Zoom W button (Thumbnail) E (Effect) button LCD monitor Eyelet for camera strap Fn/Delete button 5-function button FD (Face Detection) button Play mode/Print button...

  • Page 11: Bottom

    Identifi cation of features Bottom 5 Function button Battery holder Function Description / Battery chamber Information / Up button MENU/OK button www.samsungcamera.com Flash / Self-timer / Left button Right button Memory card slot Battery chamber cover Tripod socket Macro / Down button Play &...

  • Page 12: Self-Timer Lamp

    Identifi cation of features Self-timer lamp Mode icon Refer to page 20~24 for more information about the camera mode setting. Icon Status Description For the fi rst 8 seconds, the lamp blinks at 1 second MODE Auto Program Manual intervals. Blinking For the fi...

  • Page 13: Connecting To A Power Source

    Using the fl ash on every second 30fps frame rate shot. Using the camera for 5 minutes and then Powering it off for 1 minute. These fi gures are measured under Samsung’s standard conditions and shooting conditions and may vary depending on the user’s methods.
  • Page 14 Connecting to a Power Source You can charge the rechargeable battery SLB-10A SLB-10A by using the SAC-47 KIT Important information about USB cable usage. which consists of the AC adapter (SAC-47) and the USB cable (SUC-C3). Use a USB cable (SUC-C3) with the correct specifi cation. When the SAC-47 and SUC-C3 are combined, they can be used as an AC If the camera is connected to the PC through a USB hub: connect cable.
  • Page 15 Connecting to a Power Source How to charge the rechargeable battery (SLB-10A) Charging LED of the AC Adapter Charging LED Being Charged Red LED is on Charging is complete Green LED is on Charging error Red LED is off or blinking Being discharged Orange coloured LED is on - If you insert the fully discharged battery to charge it, do not turn on the...

  • Page 16: Inserting The Battery

    Inserting the battery Inserting the memory card Insert the battery as shown Insert the memory card as shown. - If the camera does not turn on after - Turn off the camera’s power before you have inserted battery, please inserting the memory card. www.samsungcamera.com www.samsungcamera.com check whether the battery is inserted...

  • Page 17: Instructions On How To Use The Memory Card

    Turn off the camera power whenever the memory card is being inserted recording, deleting (formatting) or reading. or removed. Samsung cannot be held responsible for lost data. Repeated use of the memory card will eventually reduce the memory It is advisable to copy important data onto other media as back-up e.g.
  • Page 18 Instructions on how to use the memory card The camera can use SD/ SDHC Memory Cards and MMC (Multi Media When using a 256MB MMC memory, the specifi ed shooting capacity will Cards). be as follows. These fi gures are approximate as image capacities can be affected by variables such as subject matter and memory card type.

  • Page 19: When Using The Camera For The First Time

    When Using the Camera for the First Time Charge the rechargeable battery fully before using the camera for the fi rst Setting up the date, time and date type time. 1. Select the [Date&Time] menu by pressing When the camera is turned on for the fi rst time, a menu will be displayed the UP/ DOWN button and press the to set date / time and language in the LCD monitor.

  • Page 20: Lcd Monitor Indicator In Recording Mode

    LCD monitor indicator in recording mode The LCD monitor displays information about the shooting functions and Description Icons Page selections. Contrast p.37 Sharpness p.37 Saturation p.38 Auto Focus Frame p.45 Camera shake Warning p.25 Date / Time 2008/01/01 01:00 PM p.71 Exposure compensation p.43...

  • Page 21: Starting The Recording Mode

    Starting the recording mode How to use the AUTO mode ( How to use the PROGRAM mode ( ) Please select this mode for quick and easy picture taking with minimal Selecting the automatic mode will confi gure the camera with optimal user interaction.

  • Page 22: How To Use The Manual Mode

    Starting the recording mode How to use the MANUAL mode ( ) How to use the DIS mode ( You can manually confi gure all functions, aperture value and shutter This mode will reduce the effect of camera shake and help you get a speed.

  • Page 23: Using The Photo Help Guide Mode

    Starting the recording mode Available functions of the photo help guide Using the PHOTO HELP GUIDE mode ( Features to use when the image is out of focus Helps the user learn the correct picture taking method Features to counter camera shake and includes solutions for potential problems that may Features to use in low light conditions occur.

  • Page 24: How To Use The Portrait Mode

    Starting the recording mode The scene modes are listed below. How to use the PORTRAIT mode ( Please select this mode for quick and easy portraits. Mode Icon Description 1. Select the portrait mode by rotating the mode dial. Use this for shooting still images at night or Nightscene in other dark conditions.

  • Page 25: How To Use The Movie Mode

    Starting the recording mode 5. Select the [RECORDING] menu by pressing the Left / Right button. How to use the MOVIE mode ( 6. Press the Down button to select the [Voice Mute] menu and press the A movie can be recorded for as long as the available recording time of the Right button.

  • Page 26: Things To Watch Out For When Taking Pictures

    Things to Watch Out for When Taking Pictures Pressing the shutter button down half way. Under certain conditions the auto focus system may not perform as expected. Lightly press the shutter button to confi rm focus and fl ash battery charge. Press the shutter button all way down to take the picture.

  • Page 27: Setting Up The Recording Function Using The Camera Buttons

    Setting up the recording function using the camera buttons The recording mode function can be set up by using the camera buttons. ZOOM W / T button POWER button If the menu is not displayed, this button works as the OPTICAL ZOOM or DIGITAL ZOOM button. Used for turning the camera’s power on / off.
  • Page 28 Setting up the recording function using the camera buttons WIDE Zoom Images taken using the digital zoom may take a little longer for the camera to process. Allow time for this to take place. Optical zoom WIDE : Pressing the ZOOM W button. This will zoom out If the Zoom buttons are being pressed during the Movie shots, the from the subject i.e.

  • Page 29: Function Description / Info / Up Button

    Setting up the recording function using the camera buttons Function Description / Info ( ) / Up button Macro ( ) / Down button While the menu is showing, the Up button operates as a direction button. While the menu is showing, press the DOWN button to move from the main menu to a sub menu, or to move down the sub menu.
  • Page 30 Setting up the recording function using the camera buttons Types of focus mode and focus range (W : Wide, T : Tele) Available focusing method, by recording mode (Unit: cm) : Selectable, : Infi nity focus range) Auto ( Program ( Mode Auto macro Macro...

  • Page 31: Focus Lock

    Setting up the recording function using the camera buttons Focus lock Flash ( ) / Left button To focus on a subject not positioned in the centre of the picture, use the focus When the menu is displayed on the LCD monitor, lock function.
  • Page 32 Setting up the recording function using the camera buttons If you press the shutter button after selecting the Auto, Fill-in, Slow Flash mode indicator synchro fl ash, the fi rst fl ash fi res to check the shooting condition Icon Flash mode Description (Flash range and Power ratio of fl...

  • Page 33: Self-Timer / Right Button

    Setting up the recording function using the camera buttons Available fl ash mode, by recording mode Self-timer ( ) / Right button : Selectable) When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor shift to the right tab. Mode When the menu is not displayed on the LCD monitor, the RIGHT button operates as the Self-timer ( ) button.
  • Page 34 Setting up the recording function using the camera buttons Selecting the self-timer Motion Timer 1. Rotate the Mode dial to select a desired Motion Icon & Self-timer lamp RECORDING mode. Pressing the Shutter button after Blink (1 second interval) 2. Press the SELF-TIMER ( ) / RIGHT button setting the Motion Timer until the desired mode indicator appears on the Detecting the subject’s movement...

  • Page 35: Menu / Ok Button

    Setting up the recording function using the camera buttons MENU / OK button FD (Face Detection) ( ) button MENU button This mode detects the face position of the subject automatically and then sets the focus and exposure. Select this mode for quick and easy face portraits. - When you press the MENU button, a menu related to each camera mode will be displayed on the LCD monitor.

  • Page 36: Fd (Face Detection) Button

    Setting up the recording function using the camera buttons This function can detect up to 9 people. Self Portrait When the camera recognises many people at the same time, it will When taking self-portraits, it automatically detects the location of the focus on the nearest person.
  • Page 37 Setting up the recording function using the camera buttons E (Effect) button E (Effect) button : Colour It is possible to add special effects to your images by using this button. By using the camera’s digital processor, it is possible to add special effects to your images - Still image mode : You can select the colour and image adjust menu.
  • Page 38 Setting up the recording function using the camera buttons Custom colour : You can change the R (Red), E (Effect) button : Sharpness G (Green) and B (Blue) values Custom Color You can adjust the sharpness of the picture of the image. you are about to take.

  • Page 39: Fn Button

    Setting up the recording function using the camera buttons E (Effect) button : Saturation Fn button By using the camera’s digital processor, it is possible to add special effects You can use the Fn button to set the following menus. to your images : Selectable) 1.

  • Page 40: How To Use The Fn Menu

    Setting up the recording function using the camera buttons How to use the Fn menu Size 1. Press the Fn button in an available mode. You can select the image size appropriate for your application. 2. Select a desired menu by pressing the Up / Down button. And then a Icon sub menu will be displayed at the bottom left of the LCD monitor.

  • Page 41: Quality / Frame Rate

    Setting up the recording function using the camera buttons Quality / Frame rate Metering If you cannot obtain suitable exposure conditions, you can change the You can select the compression ratio appropriate for your application of the captured images. The higher the compression ratio, the lower the metering method to take brighter pictures.

  • Page 42: Drive Mode

    Setting up the recording function using the camera buttons Drive mode You can select continuous shot, and AEB (Auto Exposure Bracketing). You can select the ISO sensitivity when taking pictures. [Single] ( : Take one picture only. The speed or specifi c light-sensitivity of a camera is rated by ISO numbers.

  • Page 43: White Balance

    Setting up the recording function using the camera buttons White balance Using the Custom White Balance White balance settings may vary slightly depending on the shooting The white balance control allows you to adjust environment. You can select the most appropriate white balance setting for the colours to appear more natural.

  • Page 44: Exposure Compensation

    Setting up the recording function using the camera buttons Exposure compensation Movie frame stabiliser This function helps stabilize images captured during movie recording. This camera automatically adjusts the exposure according to the ambient lighting conditions. You can select this menu only in the MOVIE mode. However, you can adjust exposure value by using [EV] menu.

  • Page 45: Setting Up The Recording Function Using The Lcd Monitor

    Setting up the recording function using the LCD monitor You can use the menu on the LCD monitor to set up recording functions. How to use the menu The items indicated by are default settings. 1. Turn on the camera and press the MENU button. A menu for each camera mode appears.
  • Page 46 Setting up the recording function using the LCD monitor Focus Area You can select your preferred Focus Area ACB(Auto Contrast Balance) adjusts the according to the shooting conditions. contrast automatically. When taking photos in an RECORDING RECORDING Center AF Focus Area Focus Area environment with big exposure differences i.e.

  • Page 47: Voice Recording

    Setting up the recording function using the LCD monitor Voice Memo Voice Recording You can add your voice-over to a stored still A voice can be recorded for as long as the image. (Max. 10 sec.) available recording time (Max. 10 hour) allows. RECORDING RECORDING Focus Area...

  • Page 48: Recording The Movie Without Voice

    Setting up the recording function using the LCD monitor Pausing while recording a voice SCENE mode Using this function, you can record your favourite Use the menu to easily confi gure optimal voice clips into a voice recording fi le without having settings for a variety of shooting situations.

  • Page 49: Starting Play Mode

    Starting play mode Turn the camera on and select Play mode by pressing the play mode button Playing back a movie ). The camera can now play back the images stored in the memory. 1. Select the recorded movie that you want to If the memory card is inserted in the camera, all the camera functions apply play back by using the Left/Right button.

  • Page 50: Movie Capture Function

    Starting play mode Movie capture function On camera movie trimming You can capture still images from the movie. You can extract desired frames of movie during the movie play back. If the running time is under 10 seconds, the movie can’t be trimmed. How to capture the movie 1.

  • Page 51: Playing Back A Recorded Voice

    Starting play mode Playing back a recorded voice Playing back a voice memo 1. Select the recorded voice that you want to 1. Select a still image that has the voice play back by using the Left/Right button. memo. 2. Press the play & pause button ( ) to 2.

  • Page 52: Lcd Monitor Indicator In Play Back Mode

    LCD monitor Indicator in play back mode Setting up the play back function using the camera buttons The LCD monitor displays shooting information about the displayed image. In Play mode, you can use the buttons on the camera to conveniently set up the Play mode functions.

  • Page 53: Setting Up The Play Back Function Using The Camera Buttons

    Setting up the play back function using the camera buttons Image enlargement The maximum enlargement rate in proportion to the image size 1. Select an image that you want to enlarge and Image size press the enlargement button. 2. Different parts of the image can be viewed by Maximum X11.4 X10.1 X9.6 X9.5...

  • Page 54: Info / Up Button

    Setting up the play back function using the camera buttons Info ( ) / Up button Play & Pause ( ) / Down button When the menu is displayed on the LCD monitor, the UP button operates as In Play mode, the play & pause ( ) / down button works as follows: a direction button.

  • Page 55: Left / Right / Menu / Ok Button

    Setting up the play back function using the camera buttons Left / Right / Menu / OK button Delete ( ) button LEFT / RIGHT / MENU / OK buttons activate the following. This deletes images stored on the memory card. - LEFT button : While the menu is showing, the LEFT button operates 1.
  • Page 56 Setting up the play back function using the camera buttons E (Effect) button : Resize - A large sized image can be made smaller, but not vice versa. - Only JPEG images can be resized. Movie (AVI), Voice recording (WAV) Change the resolution (size) of pictures taken.

  • Page 57: E (Effect) Button : Colour

    Setting up the play back function using the camera buttons E (Effect) button : Rotating an image E (Effect) button : Colour You can rotate the stored images by various degrees. It is possible to add colour effects to your images by using this button. 1.

  • Page 58: E (Effect) Button : Image Editing

    Setting up the play back function using the camera buttons Custom colour You can change the R (Red), G (Green) and ACB(Auto Contrast Balance) is to adjust the B (Blue) values of the image. Custom Color contrast automatically. 1. Select ( ) by pressing the Up/Down button and press the OK button.

  • Page 59: Contrast Control

    Setting up the play back function using the camera buttons Setting up the play back function using the LCD monitor Contrast control PLAY mode functions can be changed by using the LCD monitor. In the PLAY mode, pressing the MENU button displays the menu on the LCD You can change the contrast of the image.

  • Page 60: Setting Up The Play Back Function Using The Lcd Monitor

    Setting up the play back function using the LCD monitor This menu is available while the camera is connected to a PictBridge Menu Tab Main Menu Sub Menu Secondary Menu Page supporting printer (direct connection to the camera, sold separately) with a Auto USB cable.

  • Page 61: Multi Slide Show

    Multi slide show ( Images can be displayed continuously at pre-set intervals. You can view the Selecting Images slide show by connecting the camera to an external monitor. You can select image to view 1. Press the play mode button and press the menu button. 1.

  • Page 62: Confi Gure Multi Slide Show Effects

    Multi slide show ( Confi gure multi slide show effects Setting play interval Unique screen effects can be used for the multi slide show. Set the multi slide show play interval. 1. Select the [Effect] sub menu by pressing 1. Select the [Interval] sub menu by pressing the UP / DOWN button and press the the UP / DOWN button and press the MULTI SLIDE SHOW...

  • Page 63: Playback

    Playback ( Voice memo Protecting images You can add your voice to a stored still image. This is used to protect specifi c shots from being accidentally erased (Lock). It also unprotects images that have been previously protected (Unlock). 1. Press the Up / Down button and select PLAYBACK the [Protect] menu tab.

  • Page 64: Deleting Images

    Playback ( Deleting images Of all the fi les stored in the memory card, the unprotected fi les in the DCIM subfolder will be deleted. Remember that this will This deletes images stored on the memory. If the memory card is inserted, permanently delete unprotected images.
  • Page 65 Playback ( Standard Index This function allows you to embed printing quantity information on a stored Images (except for movies and voice fi le) are printed as index type. image. 1. Press the Up / Down button and select 1. Press the Up / Down button and select the [DPOF] menu tab.

  • Page 66: Copy To Card

    Playback ( Print size Copy To Card You can specify the print size when printing images stored on the memory This enables you to copy image fi les, movies and voice recording fi les to the card. The [Size] menu is available only for DPOF 1.1 compatible printers. memory card.

  • Page 67: Pictbridge

    Playback ( PictBridge [Copy To Card] will not be selected without inserting a memory card. You can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly. If there is not enough space available in the memory card to copy Movies and voice fi...

  • Page 68: Pictbridge : Picture Selection

    PictBridge PictBridge : Picture Selection Easy printing You can select images you want to print. When you connect the camera to printer in the Setting the Number of Copies to Print Play back mode, you can print a picture easily. 1.

  • Page 69: Pictbridge : Print Setting

    PictBridge : Print Setting PictBridge : Reset You can select the Paper Size, Print Layout, Paper Type, Print Quality, Date Initialises user-changed confi gurations. Print, and File Name Print menus for printed pictures. 1. Use the Up / Down buttons to select the 1.

  • Page 70: Sound Menu

    Sound menu Sound ( In this mode, you can set up sound settings. You can use the setup menu in Volume all camera modes, except Voice Recording mode. You can select a volume of start up sound, shutter sound, beep sound and The items indicated by are default settings.

  • Page 71: Beep Sound

    Sound ( Setup menu In this mode, you can set up basic settings. You can use the setup menu in all Beep Sound camera modes, except Voice Recording mode. If you set sound to ON, various sounds will be activated for camera startup, The items indicated by are default settings.

  • Page 72: Language

    Setup menu DISPLAY ( ) LANGUAGE Menu tab Main menu Sub menu Page There is a choice of languages that can be displayed on the LCD monitor. Wel l i n gton, Auckl a nd Samoa, Midway Even if the battery is removed and inserted again, the language setting will Honolulu, Hawaii Alaska be preserved.

  • Page 73: Start Up Image

    DISPLAY ( ) World Time Start up image - Available cities You can select the image that is fi rst displayed on the LCD monitor whenever : London, Cape Verde, Mid-Atlantic, Buenos DISPLAY the camera is turned on. Aires, Newfoundland, Caracas, La Paz, - Sub menus : [Off], [LOGO], [User Image] NewYork, Miami, Chicago, Dallas, Denver, DISPLAY...

  • Page 74: Quick View

    SETTINGS ( ) DISPLAY ( ) Quick view Formatting a memory If you enable Quick View before capturing an image, you can view the image This is used for formatting the memory. If you run [Format] on the memory, all you just captured on the LCD monitor for the duration set in the [Quick View] images, including the protected images, will be deleted.

  • Page 75: Initialisation

    SETTINGS ( ) Initialisation File name All camera menu and function settings will be restored to their default values. This function allows the user to select the fi le naming format. However, values for DATE / TIME, LANGUAGE, and VIDEO OUT will not be [Reset] : After using the reset function, the next changed.

  • Page 76: Imprinting The Recording Date

    SETTINGS ( ) Imprinting the recording date Auto power off This function switches the camera off after a set amount of time in order to There is an option to include DATE / TIME on still images. prevent unnecessary battery drainage. - Sub menus - Sub menus [Off]...

  • Page 77: Selecting Video Out Type

    SETTINGS ( ) Selecting Video out type - NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico. - PAL : Australia, Austria, Belgium, China, Denmark, Finland, The Movie output signal from the camera can be NTSC or PAL. Germany, U.K., Holland, Italy, Kuwait, Malaysia, New Zealand, Your choice of output will be governed by the type of device (monitor or TV, Singapore, Spain, Sweden, Switzerland, Thailand, Norway.

  • Page 78: Auto Focus Lamp

    - Using a Hand-made PC or a PC and OS that has not been guaranteed by the manufacturer is not covered by the Samsung warranty. - Before reading this manual, you should have a basic knowledge of...

  • Page 79: System Requirements

    System Requirements About the software After inserting the CD-ROM provided with this camera into the CD-ROM For Windows For Macintosh drive, the following window should automatically run. PC with processor better than Before connecting the camera to the PC, Pentium II 450MHz Power Mac G3 or later you should fi...

  • Page 80: Setting Up The Application Software

    About the software Setting up the application software Samsung Master : This is the all-in-one multi media software solution. To use this camera with a PC, install the application software fi rst. After this has been done, the stored images in the camera can be moved to You can download, view, edit and save your digital images and movies the PC and can be edited by an image editing program.
  • Page 81 Setting up the application software The XviD codec is distributed according to the GNU General Public License and everyone can copy, distribute and change this codec. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License.
  • Page 82 Before opening the PDF fi les, you must install the Adobe Reader image viewer program will open. included in the Software CD-ROM. If the download window of Samsung To install the Adobe Reader 6.0.1 correctly, Internet Explorer 5.01 Master opens after starting Samsung or later has to be installed.

  • Page 83: Starting Pc Mode

    Starting PC mode If you connect the USB cable to a USB port on your PC and then turn on the Connecting the camera to a PC power, the camera will automatically switch to “computer connection mode”. In this mode, you can download stored images to your PC through the USB cable.
  • Page 84 Starting PC mode Downloading stored images 4. A pop-up menu will open. Click the [Cut] or [Copy] menu. You can download the still images stored on the camera to your PC’s hard - [Cut] : cuts a selected fi le. disk and print them or use a photo editing software to edit them.

  • Page 85: Removing The Removable Disk

    Starting PC mode Removing the removable disk - By using [Samsung Master], you can see the stored images in the Windows 98SE memory directly on the PC monitor and you can copy or move the 1. Check whether the camera and PC are transferring a fi le.

  • Page 86: Setting Up The Usb Driver For Mac

    Removing the removable disk Setting up the USB Driver for MAC 5. A [Safe to Remove Hardware] window will 1. A USB Driver for MAC is not included with the software CD as MAC OS open. Click the [OK] button. supports the camera driver.

  • Page 87: Removing The Usb Driver For Windows 98Se

    This software is only compatible with Windows. 1. Connect the camera to your PC and turn them on. To start the program, click [Start → Programs → Samsung → 2. Check whether the Removable Disk is on the [My Computer].
  • Page 88 5 Zoom bar : You can change preview size. 6 Folder display window : You can see the folder location of the selected image. 7 Image display window : Images of the selected folder are displayed. Refer to the [Help] menu in Samsung Master for further information.
  • Page 89 4 Preview window : You can preview the changed image. * You can select AVI, Windows media (wmv) and A still image edited with Samsung Master can’t be played back on the Windows media (asf) fi le types. 2 Frame display window : You can insert multi media in this window.

  • Page 90: Specifi Cations

    Samsung Master. - Effective Pixel : Approx. 10.2 Mega-pixel - Total Pixel : Approx. 10.3 Mega-pixel Refer to the [Help] menu in Samsung Master for further information. Lens - Focal Length : SAMSUNG Lens f = 6.2 ~ 18.6mm (35mm fi...
  • Page 91 Specifi cations Flash - Modes : Auto, Auto & Red-eye reduction, Fill-in fl ash, - Movie Slow sync, Flash off, Red-eye Fix • With Audio or without Audio The maximum memory capacity of continuous - Range : Wide : 0.2m ~ 4.7m, movie is 2 hours.
  • Page 92 Super Fine Fine Operating Temperature - 0 ~ 40°C Normal These fi gures are measured under Samsung standard conditions and Operating Humidity may vary depending on shooting conditions and camera settings. - 5 ~ 85% “E” Button - Effect : Color, Image Adjust (Sharpness, Contrast,...

  • Page 93: Important Notes

    Important notes Be sure to observe the following precautions! Handling the camera - Never drop the camera or subject it to severe shocks or vibrations. This unit contains precision electronic components. Do not use or store - Protect the large size LCD monitor from an impact. When the camera this unit in the following locations.
  • Page 94 - Take care not to get fi ngerprints or foreign substances on the surface of the lens. - Samsung cannot be held responsible for camera malfunctions. If the digital camera is not used for a long period, an electric discharge can occur.

  • Page 95: Warning Indicator

    Warning indicator There are several warnings that may appear on the LCD display. [ File Error! ] File error [ Card Error !] Delete the fi le. Memory card error Memory card error Turn off the camera power and turn it on again Contact a camera service centre.

  • Page 96: Before Contacting A Service Centre

    Before contacting a service centre Please check the following Camera does not take images when pressing the Shutter button There is insuffi cient memory capacity The camera doesn’t switch on Delete unnecessary image fi les There is low battery capacity The memory card has not been formatted Format the memory card (p.73) Insert fresh batteries.
  • Page 97 Before contacting a service centre The fl ash does not fi re Images are too bright Flash off mode has been selected Exposure is excessive Dis-engage fl ash off mode Reset exposure compensation The camera mode can’t use the fl ash No image on external monitor Refer to the FLASH instruction (p.30) The external monitor has not been connected properly with...

  • Page 98: Faq

    Please check the following if the USB connection malfunctions. Case 6 When I open the Device Manager (by clicking Start (Settings) Control Panel (Performance and Maintenance) System (Hardware) Device Manager), there are Unknown Case 1 USB cable is not connected or it is not the supplied USB Devices or Other Devices entries with a yellow question cable.
  • Page 99 fi le transfer. manufacturing stages to preserve the environment, and is → If you install only the Samsung Master, the problems mentioned above taking a number of steps to provide customers with more occasionally happen.
  • Page 100 Declaration of Conformity Trade Name : SAMSUNG DIGITAL IMAGING CO., LTD. Model No. : SAMSUNG L200 Responsible Party : SAMSUNG ELECTRONICS AMERICA INC. Address : 105 Challenger Road Ridgefi eld Park NJ Telephone No. : 1-800-SAMSUNG(726-7864) This device complies with Part 15 of the FCC Rules. Operation is...
  • Page 101 MEMO...

This manual is also suitable for:

L200

Table of Contents