Pictbridge: Picture Selection - Samsung DIGIMAX A400 User Manual

PictBridge: Picture Selection

Select pictures to print
1. Connect the camera to your printer. The USB menu must
be set to [PRINTER] before you connect the camera to
the printer.(See p.64)
2. The [IMAGES] menu will appear.
3. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
When [ONE PIC] is selected : The PictBridge function
When [ALL PICS] is selected : The PictBridge function will be applied to all pictures,
Setting the Number of Copies to Print
- Select [ONE PIC] or [ALL PICS]. A screen where you can set the number of copies to print
will appear as shown below.
EXIT:SH1
MOVE PIC:
[ When [ONE PIC] is selected ]
- Press the Up/Down button to select the number of prints. Maximum 30 prints.
- Use the Left/Right button to select another picture and select the number of prints for
another picture.
- After setting the number of prints, press the OK button to save.
- Press the Shutter button to return to the menu without setting the number of prints.
will be applied only to the
picture currently displayed.
excluding movie clips and voice files.
0 PRINTS
SET:OK
IMAGES
ONE PIC
ALL PICS
MOVE:
0 PRINTS
EXIT:SH1 SET:OK
[ When [ALL PICS] is selected ]
SET:OK
65