Related Manuals for Samsung Digimax A4
Summary of Contents for Samsung Digimax A4
- Page 15 Repeated use of the memory card will eventually reduce the memory card’s performance. Should this be the case, you will need to purchase a new memory card. Wear and tear on the memory card is not covered by the Samsung warranty. The memory card is an electronic precision device.
-
Page 78: Important Notes
Important notes Be sure to observe the following precautions! This unit contains precision electronic components. Do not use or store this unit in the following locations. - Areas exposed to severe changes in temperature and humidity. - Areas exposed to dust and dirt. - Areas exposed to direct sunlight or the inside of a vehicle in hot weather. - Page 79 Important notes If the camera is exposed to an electronic interference, it will turn itself off to protect the memory card. Camera Maintenance - Use a soft brush (available from photo stores) to gently clean the lens and LCD assemblies. If this does not work, lens-cleaning paper with lens cleaning fluid can be used.
-
Page 80: Warning Indicator
Warning indicator There are several warnings that may appear on the LCD display Warning indicator Causes Remedy - Memory card error - Turn off the camera power and turn it on again CARD ERROR ! - Insert the memory card again - Format the memory card (p.71) - There is insufficient memory - Insert a new memory card... -
Page 81: Before Contacting A Service Centre
Before contacting a service centre Please check the following Symptom Causes Remedy - There is low battery capacity - Insert fresh batteries - An AC Power Adapter is not - Connect an AC Power Adapter connected The camera doesn t - Insert the batteries according to the polarity switch on - Batteries are inserted... - Page 82 Before contacting a service centre Symptom Causes Remedy - A picture was taken within 0.8 - If the subject is closer than 0.8m, select macro m from the subject without shot mode setting an appropriate macro The images are mode unclear - Taking a picture beyond the - Take a picture within the flash range...
- Page 83 Before contacting a service centre Symptom Causes Remedy Colour of image is - Select appropriate White balance - White balance setting is different to the incorrect original scene Images are too - Reset exposure compensation - Exposure is excessive bright - Cable connection is incorrect - Check the connection - The camera is off...
-
Page 84: Specifications
Specifications Type 1/2.7" CCD Image Sensor Effective Pixel Approx. 4.0 Mega-pixel Total Pixel Approx. 4.2 Mega-pixel SHD Lens f = 5.8 ~ 17.4mm Focal Length (35mm film equivalent : 38 ~ 114mm) Lens F No. F 2.9 ~ F 5.0 Still Image mode : 1.0X ~ 4.0X Digital Zoom Play mode : 1.0X ~ 5.0X (depends on image size) - Page 85 Audio : Mono DC power input connector : 3.3V Primary Batteries : 2 x AA alkaline, or CR-V3(Lithium) battery Secondary Batteries : 2 x Ni-MH, Samsung SBP-1303(Lithium Ion) Power Source AC Adapter(optional) : SAC-32 (DC 3.3V, 2A) * Included battery may vary depending on sales region.
-
Page 95: Starting Pc Mode
Starting PC Mode Downloading stored images You can download the still images stored on the camera to your PC's hard disk and print them or use a photo editing software to edit them. 1. Connect the camera to your PC with the USB cable. 2. - Page 96 Starting PC Mode 6. Press the right mouse button and a pop-up menu will open. Click [Paste]. 7. An image file is transferred from the camera to your PC. - By using [Digimax Viewer], you can see the stored images in the memory directly on the PC monitor and you can copy or move the image files.
-
Page 102: Using Photoimpression
Using PhotoImpression With PhotoImpression, you can edit or store still images that you downloaded from the camera. This software is only available in Windows version. To start the program, click [Start → Programs → ArcSoft PhotoImpression → PhotoImpression]. The following screen will appear. [ Help Button ] [ Command Button ]... - Page 104 [Case 4] The camera is not recognised by your PC. Sometimes, the camera may appear under [Unknown Devices] in Device Manager. → Install the camera driver correctly. Turn off the camera, remove the USB cable, plug in the USB cable again, and then turn on the camera.
- Page 105 [Case 9] When I open the Device Manager (by clicking Start → (Settings) → Control Panel → (Performance and Maintenance) → System → (Hardware) → Device Manager), there are Unknown Devices Other Devices entries with a yellow question mark(?) beside them or devices with an exclamation mark(!) beside them.
- Page 106 → Click the [OK] button. Most problems will be solved with those remedies. If the movie clip doesn't play back continuously, install the JPEGCODE provided with the camera again. For more information, visit the samsung website(www.samsungcamera.com) and see the FAQ page.
- Page 107 MEMO...