Table of Contents
Advertisement
Imprinting date recording
There is an option to include DATE/TIME on still images.
Date Imprinting
1. In any mode other than Voice Recording mode, press
the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [IMPRINT] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Use the UP and DOWN buttons to select the desired
date imprint type, and then press the OK button.
- [OFF]
- [DATE]
- [DATE&TIME]
5. Press the menu button twice and the menu will disappear.
INFORMATION
The Date & Time are imprinted at the bottom right side of the still image.
The date will be imprinted as a DATE TYPE setting.
TIME is imprinted in the following way : [Hour : Minute : Second] and hours are shown
using the 24 hour clock.
The imprint function is applied only to still images.
Beep
If you set the operation sound to ON, various sounds will be activated for camera startup,
when buttons are pressed, and if there is a card error, so that you can be aware of the
camera operation status.
Setting Operation Sounds
1. In any mode other than Voice Recording mode, press
the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]
menu tab.
3. Select the [BEEP] menu by pressing the UP/ DOWN
button and press the RIGHT button.
4. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
- If [ON] is selected : The buzzer will sound.
- If [OFF] is selected : The buzzer will not sound.
: The DATE & TIME will not be imprinted on the image file.
: Only the DATE will be imprinted on the image file.
: The DATE & TIME will be imprinted on the image file.
SETUP
DATE
OFF
TIME
DATE
IMPRINT
DATE&TIME
BACK:
SET:OK
SETUP
TIME
ON
IMPRINT
OFF
BEEP
BACK:
SET:OK
63
Hide quick links:
Advertisement
Table of Contents
