Connecting to a Power Source
: If the camera does not turn on after you have inserted batteries,
Using the batteries
please check whether the batteries are inserted with the correct
polarity(+ and-).
1. Open the battery chamber cover by pushing in the direction of
the arrow.
2. Insert the batteries taking note of the
polarity (+ / -).
Inserting the AA type battery
Inserting the CR-V3 type battery
3. To close the battery chamber cover, push it until it clicks.
There are 3 indicators for battery condition that are displayed on the LCD monitor.
Battery indicator
The batteries are fully
There is no battery capacity.
Battery status
Prepare new batteries.
charged.
Replace with new batteries.
16